Installing Rubber Mounting For Rear Final Drive

1. 1.1  Insert rubber mounting for rear final drive -1-  into the rear axle housing in such a way that the grooves -2-  are at an angle of 90° with respect to the upper edge of the rear axle housing.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Rubber mounting for rear final drive

1. 2.1  Fit T40033/5 - plate -2-  on rubber mounting for rear final drive -1-  .
2. 2.2  Guide T40032/5 - spindle -3-  through T40033/5 - plate -2-  and rubber mounting for rear final drive
3. 2.3  Fit T40032/7 - pressure piece -4-  and screw on nut -5-  .
4. 2.4  Turn nut -5-  clockwise to press rubber mounting for rear final drive -1-  into rear axle housing.
5. 2.5  Press rubber mounting for rear final drive -1-  as far as it will go into rear axle housing.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

T40032 and T40033 assembly tool