Removing Front Level Sensor

Information 

Either two or four level sensors are installed on the vehicle, depending on equipment variant:

• Steel springs without PASM: only left side of the vehicle (front and rear axle) 
• Air springs and steel springs with PASM: left and right side of the vehicle (front and rear axle) 

1. Disconnect electric line from front level sensor.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Electric plug connection for front level sensor

   1. 1.1 Release and disconnect electric plug connection -1-  .
   2. 1.2 Unclip clip -2-  .
2. Remove front level sensor -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Front level sensor

   1. 2.1 Unscrew nut -2-  .
   2. 2.2 Unscrew nut -3-  and remove front level sensor -1-  .