LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (20 Fuel Supply, Actuator 2.9L -- 95B - MACAN (95B)) >> WM, 202319 - Removing And Installing Tank Vent Valve (V6 BITURBO) >> Removing Tank Vent

Removing Tank Vent

WARNING: This page is about a different variant/trim than selected.
  1. Open heat protection -1-  .
    G15151809Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Heat protection on tank vent valve

  2. Loosen tank vent valve -1-  .
    G15151810Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Tank vent valve

    1. 2.1  Loosen spring band clamp -2-  using > VAS 6890 - spring band clamp pliers  and pull hose off the tank vent valve
    2. 2.2  Release and disconnect electric plug connection -3-  .
    3. 2.3  Unclip tank vent valve -1-  fro m holders -4-  .
  3. Unscrew screw -1-  and disconnect line -2-  from turbocharger.
    G15151811Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Tank vent valve line on turbocharger

  4. Remove tank vent valve line -1-  .
    G15151812Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Tank vent valve line

    1. 4.1  Release and disconnect quick connector securing tank vent valve line -2-  to centre intake-air distributor.
    2. 4.2  Remove tank vent valve line -1-  together with tank vent valve.
scientia non olet · About LEMON Manuals