LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (15 Engine - Cylinder Head, Valve Drive 2.9L -- 95B - MACAN (95B)) >> WM, 153619 Removing And Installing Chain TENSIONER (V6 Turbo) >> Installing Chain TENSIONER

Installing Chain TENSIONER

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Replace chain tensioner seal.
    2. 1.2  Replace screws for chain tensioner.
    3. 1.3 Tighten new  chain tensioner screws.
    • Tightening torque 9 Nm (6.5 ftlb.) 
scientia non olet · About LEMON Manuals