Technical Values

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Location	Description	Type	Basic value
Fastening screws	Retainer plate to front-axle carrier	Tightening torque	30 Nm (22 ftlb.)
Fastening screw	Step 1, engine mount	Initial tightening	90 Nm (67 ftlb.)
Fastening screw	Step 2, engine mount	Final tightening	+ 90°
Fastening screws	Engine mount to front-axle carrier	Tightening torque	55 Nm (41 ftlb.)
Front level sensor to front-axle carrier	M8 thread	Tightening torque	20 Nm (15 ftlb.)
Fastening nut for ground line in front right wheel housing	Item 2	Tightening torque	9 Nm (6.5 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Ground line in front right wheel housing
Fastening nut for ground line in front right wheel housing	Item 4	Tightening torque	9 Nm (6.5 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Ground line in front right wheel housing