LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (42 Rear Wheel Suspension Drive Shaft 3.0L -- 95B - MACAN (95B)) >> WM, 429337 Disassembling And Assembling Rear Shock Absorber >> Disassembling Rear Shock Absorber >> Disassembling Rear Shock Absorber (Conventional)

Disassembling Rear Shock Absorber (Conventional)

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pull protection cap off the spring-strut mount.
  2. Unscrew nut using ratchet -1-  and > T10001 - shock absorber set-2 to 4-  and counter at the hexagon on the piston rod at the same time.
    G15155025Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Nut on piston rod (conventional)

    1. Ratchet (commercially available)
    2. T10001/9  Extension with counter-hold tool
    3. T10001/11  Change-over ratchet
    4. T10001/1  Socket-wrench insert
  3. Remove spring-strut mount with rubber stop and boot.
  4. Pull rubber stop out of the spring-strut mount and boot.
scientia non olet · About LEMON Manuals