Removing Leakage Diagnosis Pump

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information

The leakage diagnosis unit is only installed on vehicles for the USA and China.

Removing leakage diagnosis pump -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Leakage diagnosis pump on active carbon filter
1. 1.1 Release and disconnect electric plug connection -2- .
2. 1.2 Remove screws on leakage diagnosis pump -3- .
3. 1.3 Pull leakage diagnosis pump -1- off the active carbon filter -4- (-Arrow- ).
4. 1.4 Turn the leakage diagnosis pump -1- in such a way that connection -5- is accessible.
5. 1.5 Release connection -5- , disconnect and remove leakage diagnosis pump -1- .
6. 1.6 Close off connections using suitable stoppers.