LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (20 Fuel Supply, Actuator 3.0L -- 95B - MACAN (95B)) >> WM, 202319 - Removing And Installing Tank Vent Valve (V6 MONOTURBO) >> Installing Tank Vent

Installing Tank Vent

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Replace O-rings.
    2. 1.2  Tighten screw securing tank vent valve line to turbocharger.
      • Tightening torque 9 Nm (6.6 ftlb.) 
scientia non olet · About LEMON Manuals