LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (21 Exhaust Gas Turbocharging 3.0L -- 95B - MACAN (95B)) >> WM, 214119 - Removing And Installing Pressure Pipe (V6 MONOTURBO) >> Installing Pressure Pipe >> Installing Pressure Pipe (From Charge-Air Cooler To Bottom Of Charge-Air Cooler)

Installing Pressure Pipe (From Charge-Air Cooler To Bottom Of Charge-Air Cooler)

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Tighten screw-type clamps on pressure hoses.
      • Tightening torque 5.5 Nm (4 ftlb.) 
scientia non olet · About LEMON Manuals