LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (40 Wheel Suspension Front Drive Shaft 3.0L -- 95B - MACAN (95B)) >> WM, 407719 Removing And Installing Front Anti-Roll Bar >> Removing And Installing Front Anti-Roll Bar >> Removing Front Anti-Roll Bar

Removing Front Anti-Roll Bar

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Danger of objects or loads falling down 
  • Risk of squashing or crushing 

    → Secure components to prevent them from falling down.

  1. Remove anti-roll bar -1-  .
    G15154777Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Front anti-roll bar

    1. 1.1 Unscrew nuts -3-  and counter at the screws -2-  at the same time.
    2. 1.2 Unscrew nuts -4-  and remove anti-roll bar clamps -5-  .
    3. 1.3 Lead out stabilizer -1-  with bearing.
  2. Replace screws and nuts.
scientia non olet · About LEMON Manuals