LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (40 Wheel Suspension Front Drive Shaft 3.0L -- 95B - MACAN (95B)) >> WM, 405019 Removing And Installing Wheel Bearing Housing >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unscrew drive shaft screw -1-  .
    G15154729Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Drive shaft screw

    1. 1.1 Pull off hub cap -2-  using > 9229/1 - puller hook  .
    2. 1.2 Loosen screw on drive shaft -1-  . Have another person press the brake when doing so.
    3. 1.3 Unscrew drive shaft screw -1-  .
  2. Remove front brake disc.

    > 465019 - REMOVING AND INSTALLING FRONT BRAKE DISC - SECTION ON "REMOVING"

  3. Remove front speed sensor.

    > 451119 - REMOVING AND INSTALLING FRONT SPEED SENSOR - CHAPTER ON "REMOVING"

scientia non olet · About LEMON Manuals