Installing Lower Axle Joint
WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order. Pay particular attention to the following:
- 1.1 Insert axle joint as far as it will go into the wheel bearing housing.
- 1.2 Tighten screw -1-
.
>
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Screw for lower axle joint