LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (15 Engine - Cylinder Head, Valve Drive 3.0L -- 95B - MACAN (95B)) >> WM, 158419 - Removing And Installing Camshaft Actuator (V6 Turbo) >> Preliminary Work >> Notes

Preliminary Work: Notes

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove upper chain housing cover.

    Removing and installing upper chain housing cover (V6 Turbo) 

  2. Remove centre intake-air distributor.

    > 244619 - REMOVING AND INSTALLING CENTRE INTAKE-AIR DISTRIBUTOR

  3. Remove brake booster vacuum pump.

    > 477619 - REMOVING AND INSTALLING BRAKE BOOSTER VACUUM PUMP

  4. Remove left engine carrier -1-  .
    G15145742Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Left engine carrier

    1. 4.1  Remove screws -2-  .
    2. 4.2  Remove left engine carrier -1-  .
  5. Remove vacuum reservoir -1-  .
    G15145743Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Vacuum reservoir

    1. 5.1  Remove screws -2-  .
    2. 5.2  Unscrew nuts -3-  .
    3. 5.3  Remove vacuum reservoir -1-  and set it aside.
  6. Secure engine to assembly support.

    > 100113 - SECURING ENGINE ON ASSEMBLY SUPPORT (V6 TURBO)

scientia non olet · About LEMON Manuals