Technical Values
WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance1 | Tolerance2 |
|---|---|---|---|---|---|
| Nuts securing holder to right cylinder head cover | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Nuts securing holder for solenoid valves to right cylinder head cover | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Screws for cylinder head cover on right cylinder bank | Replace following removal. | Initial tightening | 8 Nm (6 ftlb.) | ||
| Screws for cylinder head cover on right cylinder bank | Replace following removal. | Torque angle | + 90° | ||
| Screws for cylinder head cover on left cylinder bank | Replace following removal. | Initial tightening | 8 Nm (6 ftlb.) | ||
| Screws for cylinder head cover on left cylinder bank | Replace following removal. | Torque angle | + 90° |