Technical Values
WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance1 | Tolerance2 |
|---|---|---|---|---|---|
| Screw securing torque sup port bracket to engine (top) | M8 x 45 | Tightening torque | 20 Nm (15 ftlb.) | ||
| Fastening nut securing ground line to ignition coil | M6 | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Screw for solenoid hydraulic valve for valve lift adjustment | Replace following removal. | Initial tightening | 3 Nm (2 ftlb.) | ||
| Screw for solenoid hydraulic valve for valve lift adjustment | Replace following removal. | Torque angle | + 90° |