LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (15 Engine - Cylinder Head, Valve Drive 3.0L -- 95B - MACAN (95B)) >> WM, 154719 - Removing And Installing Guide And TENSIONING Rails (V6 Turbo) >> Removing Guide And TENSIONING Rails >> Removing Guide And Tensioning Rails - Left Cylinder Bank

Removing Guide And Tensioning Rails - Left Cylinder Bank

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove guide and tensioning rails -1 and 2-  .
    1. 1.1  Remove guide rail -1-  .
      1. 1.1.1  Unscrew screws -3-  .
      2. 1.1.2  Guide out and remove guide rail -1-  .
    2. 1.2  Remove tensioning rail -2-  .
      1. 1.2.1  Unscrew bearing pin -4-  .
      2. 1.2.2  Guide out and remove tensioning rail -2-  .
      G15145645Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Guide and tensioning rails - left cylinder bank

  2. Remove slide -1-  .
    1. 2.1  Carefully insert a suitable tool between the slide -1-  and holder -2-  .
    2. 2.2  Carefully lift the locking lug -3-  of the slide -1-  out of the recess -4-  in the holder -2-  .
    3. 2.3  Pull slide -1-  forward away from the cylinder head.
    G15145646Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Slide

scientia non olet · About LEMON Manuals