Preliminary Work

Sensor for body in engine compartment: 

Remove front trim panel.

> Removing and installing front trim panel 

Sensor for body on front wheel bearing housing: 

Remove front wheel.

> Removing and installing wheel 

Sensor for body on rear wheel bearing housing: 

Remove rear wheel.

> Removing and installing wheel 

Sensor for body in luggage compartment: 

Remove side trim panel for luggage compartment at the top and bottom.

> Removing and installing side trim panel for rear luggage compartment 

Remove loadspace floor.

> Refer to appropriate procedure in 70 LININGS, INSULATION (WAGON) -- 9YA - CAYENNE (9YA)