Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Rear PDCC control unit to rear PDCC control unit holder | Internal hexagon roundhead bolt, M5 x 12 | Tightening torque | 6 Nm (4.5 ftlb.) | ||
| Ground line to rear PDCC control unit | Internal hexagon roundhead bolt, M5 | Tightening torque | 5.6 Nm (3.8 ftlb.) | ||
| Rear PDCC control unit holder to body | Hexagon nut, M6 | Tightening torque | 4 Nm (3 ftlb.) | ||
| Heat shield to rear PDCC control unit holder | Speed nut | Tightening torque | 2.5 Nm (1.75 ftlb.) |