Removing (Front) PDCC Control Unit

Read and follow work instruction for 48 V vehicle electrical system.
> 2X00IN WORK INSTRUCTION FOR 48 V VEHICLE ELECTRICAL SYSTEM

Information

Check electric plug connections for damage and replace if necessary.

The seal must be fitted at the lowest point in the connector and must not have slipped out of position.

If the seal has slipped out of position, replace the connector.
Release and disconnect electric plug connections

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Electric plug connections
Release and unplug electric plug connections -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Electric plug connections
Release and unplug electric plug connection -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Electric plug connection
Press in retaining lugs -2- and pull (front) PDCC control unit -1- down out of the holder.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

(Front) PDCC control unit holder
Unscrew fastening screw -1- and remove ground line -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Ground line