Filling Air In Air Suspension System
Information
Preconditions for filling an air spring/the air spring system
- Vehicle raised on a lifting platform, wheels freely suspended.
- All components of the system installed and connected.
- > 9900 - PIWIS Tester 3 must be connected to the vehicle. Then, start > 9900 - PIWIS Tester 3 .
- Using > 9900 - PIWIS Tester 3 . select Chassis Control > Maintenance/repairs > Replacement work on the air spring system > Bleeding and filling the entire air spring system > Filling air springs
- Lower the vehicle.
- Using > 9900 - PIWIS Tester 3 . select Chassis Control > Maintenance/repairs > Replacement work on the air spring system > Bleeding and filling the entire air spring system > Activation of height control