Rear Bumper (Coupe)

Fig 1: Retaining Frame Screws With Torque Specification

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screws on retaining frame

1	> Tightening torque 2.5 Nm (1.8 ftlb.)

Fig 2: Rear Bumper Screws With Torque Specification

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Rear bumper screws

1	> Tightening torque 2.5 Nm (1.8 ftlb.)

Fig 3: Shield On Rear Bumper Component Location With Torque Specification

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Shield on rear bumper

1	> Tightening torque 3.5 Nm (2.6 ftlb.)
2	Shield on rear bumper

Fig 4: Rear Lid Anchor Block Component Location With Torque Specification

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Rear lid anchor block

1	> Tightening torque 10 Nm (7.4 ftlb.)
2	Rear lid anchor block to rear bumper

Fig 5: Light Frame Screws With Torque Specification

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screw on light frame

1	> Tightening torque 2.5 Nm (1.8 ftlb.)

Location	Description	Type	Basic value	Tolerance
Nut securing earth line to earth support point	Item 2	Tightening torque	9 Nm (6.6 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Ground line