Pressure Pipe And Intake Pipe (V6 Monoturbo)

Fig 1: Pressure Pipe And Intake Pipe Components Location With Torque Specification - V6 Monoturbo

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Pressure pipe and intake pipe - V6 monoturbo

1	Suction hose
2	Screw-type clamp >Tightening torque 3.5 Nm (2.5 ftlb.)
3	Seal/replace if damaged
4	Pressure pipe
5	Screws >Tightening torque 8 Nm (6 ftlb.)
6	Seal/replace if damaged
7	Screw >Tightening torque 8 Nm (6 ftlb.)