LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (10 Engine - Crankcase, Suspension 4.0L -- 9YA - Cayenne (9YA)) >> WM, 108319 Removing And Installing Engine Cover (Design Cover) (V8 BITURBO) >> Removing Engine Cover

Removing Engine Cover

WARNING: This page is about a different variant/trim than selected.
  1. Remove engine cover -2-  .
    G15211412Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Engine cover (shown as an example)

    1. 1.1  Carefully open clips -1-  using a plastic wedge.
    2. 1.2  Lift engine cover -2-  up at the front -Arrows-  and pull it out of the guide at the rear.