LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (10 Engine - Crankcase, Suspension 4.0L -- 9YA - Cayenne (9YA)) >> WM, 103519 Removing And Installing Engine Mounts (V8 Turbo) >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Support the engine on the body.

    > WM, 100113 SECURING ENGINE ON ASSEMBLY SUPPORT (V8 BITURBO) 

  2. Remove front underbody cover.

    > WM, 519219 REMOVING AND INSTALLING COVER FOR FRONT UNDERBODY

  3. Remove wheel housing liner.

    > WM, 505619 REMOVING AND INSTALLING FRONT WHEEL HOUSING LINER

  4. Only for V8 Hybrid: 

    Remove air-conditioning compressor.

    > 873419 REMOVING AND INSTALLING AIR-CONDITIONING COMPRESSOR

  5. Disconnect anti-roll bar on front axle carrier.

    > WM, 407719 REMOVING AND INSTALLING FRONT ANTI-ROLL BAR

    > 407719 REMOVING AND INSTALLING STABILIZER, FRONT (PDCC)

  6. Left side only: 

    Disconnect coolant lines on the front axle carrier.

    G15211386Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Coolant lines on the front left axle carrier

    1. 6.1  Unscrew screw -2-  .
    2. 6.2 
scientia non olet · About LEMON Manuals