Subsequent Work

WARNING: This page is about a different variant/trim than selected.

Install new crankshaft sealing ring.
> 137455 REPLACING SEALING RING FOR CRANKSHAFT PULLEY
Install crankshaft vibration damper.
> 137519 REMOVING AND INSTALLING CRANKSHAFT VIBRATION DAMPER (V8 BITURBO)
Install guide tube for oil dipstick -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Guide tube for oil dipstick
1. 3.1 Replace O-ring on guide tube for oil dipstick.
2. 3.2 Insert guide tube for oil dipstick -1- into the crankcase cover -opposite direction to arrow- .
3. 3.3 Fit and tighten screw on guide tube for oil dipstick -2- .
  > Tightening torque 9 Nm (6.5 ftlb.)
Install belt tensioner (air-conditioning compressor).
> 137319 REMOVING AND INSTALLING BELT TENSIONER (AIR-CONDITIONING COMPRESSOR)
Install oil guide housing.
> 174619 REMOVING AND INSTALLING OIL GUIDE HOUSING (V8 BITURBO)