Removing Crankcase Cover

Fig 1: Crankcase Cover Screws Loosening Sequence

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Crankcase cover

1. 1.1  Unscrew screws in the sequence -10 to 1-  .
2. 1.2  Loosen crankcase cover.
   1. 1.2.1  Screw the screws into the bore holes -Arrows-  .
   2. 1.2.2  Screw the screws into the bore holes -Arrows-  alternately by half a turn until the crankcase cover becomes loose.
3. 1.3  Remove crankcase cover.