Removing Oil Pan
WARNING: This page is about a different variant/trim than selected.
WARNING:
Toxic substances
- Danger of poisoning or suffocation
- Danger of burns to the eyes and skin
- → Ventilate the work area well.
- → Never ingest or inhale.
- → Read specific information on the Hazard Sheet.
- → Wear personal protective gear.
- → Do not smoke, eat or drink in the work area.
WARNING:
Hot fluid
- Danger of scalding
- → Let the fluid cool down.
- → Wear personal protective gear.
WARNING:
Highly inflammable or explosive materials
- Danger of fire or explosion
- → Avoid contact with hot parts or sources of ignition.
- → Use suction to remove ignitable vapours.
- → Attach warning sign in a clearly visible position.
- → Contain leaked media using non-flammable absorbent material and put it in a container designed for this purpose for disposal in accordance with local requirements.
- → Secure collection containers/vessels to prevent them from tipping over.
- Release and disconnect electric plug connection -1-
for oil level sensor -2-
.
Electric plug connection for oil level sensor
Information
Check for residual oil when removing the oil pan.
- Remove oil pan -1-
.
Oil pan
- 2.1 Unscrew screws in the sequence -19 to 2- .
- 2.2 Loosen and remove oil pan -1- .
Information
Sealing faces must be free of oil and grease!
- Clean sealing faces on the oil pan and oil guide housing using a special plastic brush for drills to remove residual sealant.