Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| V8: Screw securing air-conditioning compressor support to engine | V8: M8 x 30 | Tightening torque | 23 Nm (17 ftlb.) | ||
| Screws for chain housing cover | M6 x 25 (19 ea.), observe tightening sequence | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Step 1: Screw for oil guide housing | M6 x 20 (21 ea.), observe tightening sequence! | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Step 2: Screw for oil guide housing | M6 x 20 (21 ea.), observe tightening sequence! | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Screws for oil intake tube | M6 x 20 | Tightening torque | 9 Nm (6.5 ftlb.) |