Front Apron
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance |
|---|---|---|---|---|
| Screws securing retaining strip to front end | Tightening torque | 6 Nm (4.5 ftlb.) | ||
|
Screws |
||||
| Nuts securing retaining strip to wing | Item 1 | Tightening torque | 4 Nm (3 ftlb.) | |
|
Nuts |
||||
| Screws securing wheel cover bracket to wing | Item 2 | Tightening torque | 1.5 Nm (1 ftlb.) | |
|
Wheel cover bracket |
||||
| Screw securing air duct for brake to front apron, bottom | Item 1 | Tightening torque | 3 Nm (2 ftlb.) | |
|
Screw on air duct for brake |
||||
| Screw securing front apron to wing | Item 1 | Tightening torque | 2.5 Nm (1.75 ftlb.) | |
|
Screw on front apron |
||||
| Screws securing front apron to front end, bottom | Item 1 | Tightening torque | 4.5 Nm (3.25 ftlb.) | |
|
Screws securing front apron to front end at the bottom |
||||
| Screws securing front apron to front end, top | Item 1 | Tightening torque | 3 Nm (2 ftlb.) | |
|
Screws securing front apron to front end at the top |
||||
| Screw securing front spoiler to front apron | Item 1 | Tightening torque | 2.3 Nm (1.7 ftlb.) | |
|
Screw securing front spoiler to front apron |
||||