Assembly And Endurance Strength

Information 

• The object temperature must be within the recommended processing temperature range for the entire specified time period. 

Information 

• Do not put pressure on bonded joints until the required endurance strength is reached. 
• If the vehicle is handed over before the specified endurance strength is reached, remind the customer to wait 24 hours before washing the vehicle in a car wash, for example. 

The vehicle must not be moved and no further work must be carried out on the vehicle following repair bonding for at least> Time 30 min  .

The structural durability of adhesive tape or adhesive pad is reached after > Time 24 h  .