LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (70 Linings, Insulation (Wagon) -- 9YA - Cayenne (9YA)) >> WM, 708719 Removing And Installing Trim Panel For Rear Lid >> Removing Trim Panel For Rear Lid

Removing Trim Panel For Rear Lid

WARNING: This page is about a different variant/trim than selected.
  1. Open warning triangle cover -1-  .
    G15239828Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Warning triangle cover

  2. Unscrew and remove screws -1-  .
    G15239829Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Screws

    Information 

    Start at the rear window when removing the trim panel.

    Information 

    To prevent damage, use a suitable tool as a support during removal at accessible connection points.

  3. Unclip trim panel for rear lid at the bottom -1-  and remove it from the rear lid.
    G15239830Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Trim panel for rear lid, bottom

  4. Unclip and remove trim panel for window frame at the centre -1-  .
    G15239831Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Trim panel for window frame, centre

  5. Unclip and remove trim panel for window frame at the side -1-  .
    G15239832Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Trim panel for window frame, side