LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (70 Linings, Insulation (Wagon) -- 9YA - Cayenne (9YA)) >> WM, 70631901 Removing And Installing Rear Handle >> Installing Rear Handle

Installing Rear Handle

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Screw in screw and tighten to > Tightening torque 2.3 Nm (1.7 ftlb.)  .

    Screw in screws for armrest and tighten to > Tightening torque 2.3 Nm (1.7 ftlb.)  .

    Screw in screws for armrest and tighten to > Tightening torque 2.8 Nm (2.1 ftlb.)  .

    Screw in screws for armrest and tighten to > Tightening torque 2.3 Nm (1.7 ftlb.)  .

    Screw in screws for armrest and tighten to > Tightening torque 2.8 Nm (2.1 ftlb.)  .

scientia non olet · About LEMON Manuals