Removing Seat Position Sensor

WARNING: This page is about a different variant/trim than selected.

Unscrew fastening screw -1- from seat position sensor -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fastening screw
Remove seat position sensor -2- from the seat frame.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Seat position sensor
Unclip electric wire harness -1- with line bracket -2- from the seat frame.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Electric wire harness

Information

Choose a place for the joint where there is enough space for connecting all the individual lines.

Do not cut the lines too short in case they have to be laid in a different position if there is insufficient space in the area of the joint.
Disconnect seat position sensor from wire harness.