LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 51 (69 Occupant Protection/Personal Protection (Wagon) -- 9YA - Cayenne (9YA)) >> WM, 693619 Removing And Installing Adjustment Fitting >> Installing Adjustment Fitting

Installing Adjustment Fitting

WARNING: This page is about a different variant/trim than selected.

Information 

Always replace screws on the three-point seat belt. Micro-self-locking screws must not be treated (greased) or loosened and then screwed on again.

  1. Installation is performed in reverse order. Pay particular attention to the following:

Screw in screw and tighten to > Tightening torque 20 Nm (15 ftlb.)  .

Screw in screw and tighten to > Tightening torque 40 Nm (30 ftlb.)  .

scientia non olet · About LEMON Manuals