Removing Rear Three-Point Belt For Middle Seat
WARNING: This page is about a different variant/trim than selected.
WARNING:
Incorrect handling of safety bolts
→ Always use new screws or nuts following removal.
→ Comply with instructions for repairs.
→ Observe specified tightening torques.
→ Carry out a visual inspection of parts used.
- Danger of injury
- Loss of torque
→ Always use new screws or nuts following removal.
→ Comply with instructions for repairs.
→ Observe specified tightening torques.
→ Carry out a visual inspection of parts used.
- Release locking lug -1-
and remove belt feed-through element -2-
from rear three-point belt for middle seat -3-
.
Belt feed-through element
- Screw off fastening nut -1-
.
Fastening nut on belt retractor
- Feed rear three-point belt for middle seat -3-
through the rear backrest cover (2/3-split folding rear seat) -2-
, padding for rear backrest (2/3-split folding rear seat) -1-
and backrest frame.
Rear three-point belt for middle seat
- Remove rear three-point belt for middle seat -2- under the padding for rear backrest (2/3-split folding rear seat).
Belt retractor for three-point belt