LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 39 (55 Lids, Flaps (Wagon) -- 9YA - Cayenne (9YA)) >> 5595 Lid Proximity Sensor Control Unit >> WM, 559519 Removing And Installing Rear Proximity Sensor Antenna >> Installing Proximity Sensor Antenna

Installing Proximity Sensor Antenna

WARNING: This page is about a different variant/trim than selected.
  1. Clean bonding surface on proximity sensor antenna using isopropanol.
    G15260623Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding surface on proximity sensor antenna

  2. Connect electric plug connection.

    Electric plug connection must engage securely.

    G15260624Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Electric plug connection

  3. Stick the proximity sensor antenna on.
    G15260625Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Proximity sensor antenna

    1. 3.1 Stick the proximity sensor antenna parallel to the rear panel in the marked area.
    2. 3.2 Press proximity sensor antenna firmly onto the rear panel.
  4. Fasten proximity sensor antenna to holder.
    G15260626Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Tie-wrap

    1. 4.1 Fasten proximity sensor antenna to holders with cable ties.
    2. 4.2 Cut off any excess cable tie length.
scientia non olet · About LEMON Manuals