Removing Filler Flap (Module)

WARNING: This page is about a different variant/trim than selected.

Remove cover -1- from side trim panel.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Emergency release
Disengage filler flap (module) emergency release -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Emergency release
Open fuel tank cap -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fuel tank cap

Information

The filler flap (module) will be damaged during removal and must be replaced during installation.
At the marked positions -arrows A- , pierce the module using a screwdriver.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Locking lugs on inner part of filler flap (module)
Release locking lugs -arrows A- on inner part of filler flap (module).

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Locking lugs on inner part of filler flap (module)
Press rubber sleeve in -direction of arrow B- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Locking lugs on inner part of filler flap (module)

Information
- Remove the filler flap carefully so as not to damage the paintwork on the side wall.
Swivel filler flap (module) -1- out of the body aperture until the electric plug connection -3- is accessible.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Filler flap (module)
1. 7.1 Pull drain hose -2- off the filler flap (module) -1- .
2. 7.2 Release and unplug electric plug connection -3- .
Disengage emergency release -1- and remove filler flap (module) -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Emergency release