Installing Front Lock Upper Part

1. Position front lock upper part -1-  and fit nuts -2-  by hand.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Lock upper part

2. Close the lid slowly until the clip -1-  for the front lock upper part is touching the lower part of the lock -2-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Lower part of lock

3. Position front lock upper part so that the clip -1-  is centred flush with the slot in the lower part of the lock -2-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Lower part of lock

4. Open the lid again and tighten nuts -2-  to > Tightening torque 8 Nm (6 ftlb.)  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Lock upper part