Removing Front Lock Lower Part
WARNING: This page is about a different variant/trim than selected.
- Loosen front lock lower part.
- 1.1 Unclip electric plug connections -1-
from front lock carrier -arrows-
.
Electric plug connections
- 1.2 Pull off cable holder -1-
.
Cable holder
- 1.3 Unscrew fastening screws -2-
.
Fastening screws
- 1.4 Pull front lock lower part up and out until the bowden cable, release element and microswitch are accessible.
- 1.1 Unclip electric plug connections -1-
from front lock carrier -arrows-
.
- Release microswitch -1-
using a suitable tool and pull it out of the front lock lower part -2-Arrow-
.
Microswitch
- Unclip bowden cables -1-
from front lock lower part -2-Arrow-
.
Bowden cables
- Remove front lock lower part.