LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 39 (55 Lids, Flaps (Wagon) -- 9YA - Cayenne (9YA)) >> 5510 Front Lid Release >> WM, 551019 Removing And Installing Front Lid Release >> Installing Front Lid Release

Installing Front Lid Release

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:

Screw in fastening screws and tighten to > Tightening torque 2 Nm (1.5 ftlb.)  .

scientia non olet · About LEMON Manuals