LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 36 (19 Engine - Cooling 4.0L -- 9YA - Cayenne (9YA)) >> WM, 197819 Removing And Installing Coolant Temperature Sensor (V8 BITURBO) >> Removing Coolant Temperature Sensor >> Installing Coolant Temperature Sensor

Installing Coolant Temperature Sensor

WARNING: This page is about a different variant/trim than selected.
  1. Position coolant temperature sensor with new  O-ring.
    1. 1.1  Fit and tighten screw.

      > Tightening torque 9 Nm (6.5 ftlb.) 

    2. 1.2  Connect and lock cable plug.
scientia non olet · About LEMON Manuals