Removing Coolant Pipe Switching Valve (Engine Control Unit For Transmission Oil Preheating)

WARNING: This page is about a different variant/trim than selected.

Remove the coolant pipe switching valve

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Coolant pipe switching valve
1. 1.1 Release retaining clip -2- .
2. 1.2 Loosen spring band clamp -3- using > VAS 6890 - spring band clamps pliers .
3. 1.3 Unscrew screws -4- and pull coolant pipe switching valve -1- off the coolant hose -5- .
4. 1.4 Catch escaping coolant and close off line connections using suitable stoppers.