LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 35 (21 Exhaust Gas Turbocharging 4.0L -- 9YA - Cayenne (9YA)) >> WM, 216719 Removing And Installing Bypass Flap Control Box (V8 BITURBO) >> Removing Bypass Flap Control Box

Removing Bypass Flap Control Box

WARNING: This page is about a different variant/trim than selected.

Information 

The procedure for removing and installing is described for one side as an example. The procedure for the other side is almost identical.

  1. Remove control box -1-  .
    1. 1.1  Pull off vacuum hose -2-.
    2. 1.2  Unclip circlip -3-. Replace circlip! 
    3. 1.3  Unscrew nuts -4-  and remove control box -1-  .
    G15258899Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Control box for bypass flap

scientia non olet · About LEMON Manuals