Subsequent Work
WARNING: This page is about a different variant/trim than selected.
For pressure pipe at the turbocharger:
- Install air-cleaner cowl.
> Removing and installing air box for air cleaner
- Install intake manifold.
> Removing and installing intake manifold (V8 biturbo)
For pressure pipe on charge-air cooler:
- Install headlight.
- Install intermediate piece.
- Install cover for front lock support.
> 703919 REMOVING AND INSTALLING COVER FOR FRONT LOCK SUPPORT
For pressure pipe on intake-air distributor:
- Install cooling fan housing.
- Install line from compressor to evaporator (engine compartment section).
> 874519 REMOVING AND INSTALLING LINE FROM COMPRESSOR TO EVAPORATOR