Removing DME Control Unit

NOTIFICATION 

Voltage peaks 

• Risk of damage to electrical load or to the control unit 
  1. → Switch off ignition and keep transmitter key outside of the transmission range (at least 5 m).
  2. → Switch off electrical loads before disconnecting or removing them.

1. Release and disconnect electric plug connections -2-  on the DME (petrol) control unit -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Electric plug connections

2. Release retaining lugs -Arrows-  and remove DME (petrol) control unit -1-  from holder -2-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   DME (petrol) control unit