LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (28 Ignition System, PREGLOW System 4.0L -- 9YA - Cayenne (9YA)) >> WM, 287219 Removing And Installing Knock Sensor (V8 BITURBO) >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Remove front cover.

    > Removing and installing front cover 

    Only for removing front knock sensor on cylinder bank 1:  Remove generator.

    > Removing and installing generator 

    Only for removing front knock sensor on cylinder bank 2: 

    Remove air-conditioning compressor.

    V8 biturbo:

    > Removing and installing air-conditioning compressor 

    Only for removing rear knock sensors (on both cylinder banks): 

    Remove engine carrier.

    > Removing and installing engine mounts (V8 biturbo)