LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (28 Ignition System, PREGLOW System 4.0L -- 9YA - Cayenne (9YA)) >> WM, 283919 Removing And Installing Camshaft Sensor (V8 BITURBO) >> Installing Camshaft (V8 BITURBO) >> Installing Camshaft Sensor

Installing Camshaft Sensor

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following: 1.1  Replace camshaft sensor.
    1. 1.2  Tighten screws on camshaft sensor to > Tightening torque 9 Nm (6.5 ftlb.) (6.6 ftlb.)  .
scientia non olet · About LEMON Manuals