Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Double screw for ignition coil | M6 x 45 - M6 x 12 | Tightening torque | 9 Nm (6.5 ftlb.) (6.6 ftlb.) | ||
| Fastening nut securing ground line to ignition coil | M6 | Tightening torque | 9 Nm (6.5 ftlb.) (6.6 ftlb.) | ||
| Screw for torque support bracket | M8 x 55/(V6 Turbo: M8 x 45) | Tightening torque | 23 Nm (17 ftlb.) | ||
| Torque support bracket upper part to lower part | M10 x 35 | Tightening torque | 55 Nm (41 ftlb.) | ||
| Screws for coolant reservoir holder (low-temperature) | Tightening torque | 8 Nm (6 ftlb.) |