LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (66 Exterior Equipment (Wagon) -- 9YA - Cayenne (9YA)) >> WM, 660719 Removing And Installing Front Logo >> Installing Front Logo

Installing Front Logo

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Screw on fastening nuts and tighten to > Tightening torque 1.3 Nm (0.8 ftlb.)  .

scientia non olet · About LEMON Manuals