LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 28 (19 Engine - Cooling 2.9L -- 9YA - Cayenne (9YA)) >> WM, 193519 Removing And Installing Cooling Air Flaps (Top) >> Installing Cooling Air Flaps (Top) >> Installing (Upper) Cooling-Air Flaps

Installing (Upper) Cooling-Air Flaps

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Screw in screws and tighten to > Tightening torque 8 Nm (5.9 ftlb.)  .

    Screw in screws and tighten to > Tightening torque 8 Nm (5.9 ftlb.)  .